Details

Category: Uncategorised

Published: 11 August 2015

Hits: 9673

             TECHNICAL UNIVERSITY OF KOŠICE                    
             Faculty of Mechanical Engineering
             Institute of Special Engineering Processes
             DEPARTMENT OF QUALITY SAFETY 

             AND ENVIRONMENT
             Letná 1/9, 042 00, Košice - Sever

             tel: +42155 / 602 2501 
             e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Downloads

Professional documents:

• New classification of hazardous substances in companies that fall under the Act on the Prevention of Serious Industrial Accidents
• On October 27, a planned rehearsal of the plan for the protection of employees and persons taken into care in the event of a chlorine leak in the Finalization Process operation at the stud foundry took place in Slovalec. The exercise was performed in accordance with the requirements of the lawyer. 42/1994 Coll. on Civil Protection of the Population and Act no. 128/2015 on the prevention of major industrial accidents.

Teaching:

• List of software offered as part of the teaching at the department, and responsible staff
• Oravec,M.: Manažérstvo priemyselných havárií, e-skriptá
• Oravec,M., Fic, M.: Systém hodnotenia rizík pre posúdenie enviromentálnej škody podľa zákona NR SR č. 359/2007 Z. z.

Publications, habilitations,...:

• Zoznam karentovaných časopisov s možnosťou publikácie v oblasti BOZP.
• Vyhláška č.233/2011, ktorá novelizuje zákon o VŠ - obal záverečnej práce, rigoróznej práce, habilitačnej práce, titulný list , licenčná zmluva,...
• PD-SjF-02-2015-Podmienka pripustenia k obhajobe dizertačnej práce.

Presentations:

• Správa o činnosti KBaKP
• Prezentácia - Maschinensicherheit - Günter Lehder - Bergische Universität Wuppertal
• Prezentácia - Generic Management - Stefan Ott/ Petra Winzer - Bergische Universität Wuppertal
• Prezentácia - Europäischen chemikalienrecht, nationales umsetzungsbeispiel - Anke Kahl - Bergische Universität Wuppertal
• Prezentácia - Univ.-Prof. Dr. Wilfried Sihn - „Mobilita budúcnosti – Aktuálne Trendy a výzvy pre elektromobilitu“ (SK)
• Prezentácia - Univ.-Prof. Dr. Wilfried Sihn - „Mobilität der Zukunft – Aktuelle Trends und Herausforderungen der Elektromobilität“ (DE)
• Prezentácia P. Winzer - KitVes Team
• Prezentácia P. Winzer, J. Sitte - Demand Compliant Design of Autonomous Robots
• Prezentácia P. Winzer, F. Riekhof - Methodische Produktentwicklung
• Prezentácia P. Winzer, N. Müller - Modellierung-mechatronischer Systeme
• Prezentácia P. Winzer, Ch. Hartmann- DeCoDe+X in KitVes, Demand Compliant Design in the Development of a Solution for Harvesting High-Altitude Winds for Energy Generation on Vessels
• Prezentácia G. Hoeborn, J. Bredtmann, J. B. Hauge - Management Systems and Quality Aspects
• Prezentácia G. Hoeborn, J. Bredtmann, J. B. Hauge - Creative Methodologies for Problem Solution
• Prezentácia V. Adamec - Historie integrovaného záchranného systému v ČR
• Prezentácia V. Adamec - Bezpečnost ČR - vývojové trendy
• Prezentácia Š. Kročová - Problematika ochrany KI, vodné hospodárstvo v ČR
• Prezentácie a zborník s konferencie - Znečistene územia Štrbské Pleso 2014

Details

Category: Uncategorised

Published: 11 August 2015

Hits: 8888

Study programmes annotations – Department of Safety and Quality:

Bc. Quality and Safety: presence and distant form

It is possible to realize the educational process and individual subjects within the study programme Quality and Safety in the study field of Mechanical Engineering in the 1st degree of a university-degree study by means of both present and distance way of studying. During the studies in this field, the student shall acquire knowledge from the area of Quality Management (control) in Mechanical Engineering production, Safety and Occupational health, as well as the main information on requirements for the Maintenance and Machinery Safety Management.

Safety and Quality department, guaranteeing education of the respective study programme, has had a long-term cooperation with industrial practice. The result of the cooperation is an educational model involving professionals within the quality, safety and maintenance management department. Final theses are thematically oriented on practical outputs.

Within the studies, student is able to apply statistic regulation procedures of production processes and tools of quality improvement, to implement requirements according to international standards for Quality Management System (ISO 9001, IATF 16949), or Occupational health and Safety Management System (ISO 45001).By using software applications, students will master (achieve) skills of designing and modelling safe machinery construction based on Industry 4.0 requirements. They will learn to apply risk assessment tools for production processes and safe products in accordance with the requirements of valid EU legislation. Based on the acquired knowledge, they will have a possibility of working in various production and non-production enterprises (however, mainly in engineering and automobile industry). The graduate of the study field is able to apply principles and requirements of management systems targeting on the achievement of production efficiency of the sustainable development of the society.

After graduating from bachelor studies, a student may be hired as a quality or maintenance technician, or a safety technician. Knowledge of a foreign language shall provide the graduate with opportunities in further career in practice.

Ing. (Dipl.-Ing./ M.Eng.) Safety of Technical Systems : presence and distant form

This study programme, throughout its entire education process, puts an emphasis on teaching realised mainly in cooperation with professionals from practice as the Safety and Quality Department has more than a 20-year intensive cooperation with them.

The main pillars of the study programme are safety – maintenance – quality – continuity, the base is so-called ´Risk based Thinking´. The student of second degree (Ing.) of university studies, study programme Technical system safety in the study specialisation Mechanical Engineering, acquires the ability how to form and lead an experimental team in the area of interest, how to lead teams for supervision, inspection and certification of technical systems with regards to the safety of their operation in accordance with the principles of safety and health protection at work and the requirements for the prevention of severe industrial accidents. The graduate is capable of performing the analysis of particular problems, analysing products/systems and apply safe procedures, modelling industrial processes and their accidents, realising simulation procedures and solving tasks by means of virtual models. The graduate has a possibility to apply knowledge from subjects as a preparation for exams of various authorisations, which are necessary for an integrated performance of activities in practice.

Graduates are able to work also as independent experts (safety technician, authorised safety technician, fire technician, management system auditor, etc.) but also as management staff in the field of quality management, safety, fire protection, maintenance in a production or non-production organisation.

Graduates of this study programme are sought by practice already during their studies. They participate in research activities of the department for practice or the proposal of patents from the field of basic but also applied research.

Tasks of individual subjects and final theses are specifically led with regards to practical requirements.

PhD. Quality and Safety: presence and distant form

The study program Quality and Safety in the study specialisation Machinery in 3rd degree of university studies is possible to be done in presence and distant form.

This programme is mainly aimed at solving particular tasks of research activities of a workplace (basic and applies research). The international cooperation of the department in the field of quality management, maintenance management, safety of machinery and industrial processes enables, during the studies, to acquire knowledge and skills when developing international standards, methodology and tools applicable for industrial practice on the worldwide level. Qualitative and quantitative methods of risk assessment (e.g.: FMEA, HAZOP, ETA, FTA, RCFA) are essential to solve problems of the management of processes, machinery and technology, severe industrial accidents, business continuity and property safety.

A graduate of this specialisation is capable of independent, scientific, and methodical work on the innovation of new products, technology, process improvement, implementation of preventive and proactive tools into management systems on the basis of risk.

Interesting internet links

• EnviroPortál - Prevencia ZPH
• Asociácia technických diagnostikov Slovenskej republiky
• Technická univerzita v Košiciach
• Strojnícka fakulta TU v Košiciach
• Pošta na TUKE
• MAIS TUKE
• Stravovanie TUKE
• Interný telefónny zoznam TUKE
• Ministerstvo práce, sociálnych vecí a rodiny SR

• Národný inšpektorát práce
• Slovenská asociácia pre bezpečnosť a ochranu zdravia pri práci a ochranu pred požiarmi
• Medzinárodná organizácia práce (MOP)
• The Information Systems Security Association (ISSA)
• Európska agentúra pre bezpečnosť a ochranu zdravia pri práci
• World University Rankings
• Ministerstvo školstva SR
• European University Association
  
• Úrad pre normalizáciu, metrológiu a skúšobníctvo SR
  
• Slovenská legálna metrológia
  
• Slovenska spoločnosť pre kvalitu
  
• European Foundation For Quality Management
  
• American Society for Quality

Security a little differently

• Bezpečnost práce aneb jak rychle umřít
• Zásady bezpečnosti pri práci - Secure your work