-
Home
-
Study
-
Laboratória, učebne a posluchárne
- Veda a Výskum
| Ústav | Katedra | R.č. projektu | Názov projektu | Zodpovedný riešiteľ | od | do |
|---|---|---|---|---|---|---|
| ÚŠIP | KBaKP | 22230024 | Improving quality management teaching in the era of Industry 4.0 | prof. Ing. Hana Pačaiová, PhD. | 3/2023 | 8/2024 |
| Fakultné pracovisko |
PaIC | 824990-RIMA | Robotics for Infrastructure Inspection and Maintenance (RIMA) |
Ing. Ladislav Vargovčík, PhD. | 1/2019 |
6/2023 |
| HORIZON-BOWI- cascade call | BOWI boosting widening of DIHs network | Ing. Ladislav Vargovčík, PhD. | 2022 | 2024 | ||
| DIH2 - 824964 | Robotics for agile production (DIH2) | Ing. Ladislav Vargovčík, PhD. | 6/2022 | 6/2023 | ||
| DIH4AI OC1 003-DIH_okAI |
Boosting AI vision system for robotics assembly line through cross regional DIHs cooperation | Ing. Ladislav Vargovčík, PhD. | 7/2022 | 3/2023 |
| Ústav | Katedra | R.č. projektu | Názov projektu | Zodpovedný riešiteľ | od | do |
|---|---|---|---|---|---|---|
| ÚAMRaVT | KPAaM | 730994 TERRINet |
Cognitive Industrial Robotics: Kinematic Control of “Pick and Place” Robot Application (SAITA-DAR) | doc. Ing. Ivan Virgala, PhD. | 8/2022 | 8/2022 |
| Kinematic Control of Pick and Place Application (SAITA-DAR) | doc. Ing. Ivan Virgala, PhD. | 10/2022 | 10/2022 | |||
| ÚTaMI | KTMaPPV | DAAD - PPP | Entwicklung und Erprobung eines kombinierten Werkzeugs zur Präzisionsbearbeitung hochbean-spruchter Innen- und Außenflächen am Beispiel von Gelenkpfannen | prof. Ing. Ildikó Maňková, CSc.. | 2/2021 | 12/2022 |
| 734205-NEWEX- H2020-MSCA -RISE-2016 |
Investigation and development of a new generation of machines for the processing of composite and nanocomosite materials (NEWEX) | doc. Ing. Ľudmila Dulebová, PhD. | 1/2017 | 05/2022 | ||
| Fakultné pracovisko |
PaIC | 824990-RIMA | Robotics for Infrastructure Inspection and Maintenance | Ing. Ladislav Vargovčík, PhD. | 1/2019 |
12/2022 |
| DIH2 - 824964 | Podpora rozvoja priemyselnej robotiky a spolupráca na riešení DIH | Ing. Ladislav Vargovčík, PhD. | 6/2022 | 6/2023 | ||
| DIH4AI OC1 003-DIH_okAI |
Boosting AI vision system for robotics assembly line through cross regional DIHs cooperation | Ing. Ladislav Vargovčík, PhD. | 7/2022 | 3/2023 |
| Ústav | Katedra | R.č. projektu | Názov projektu | Zodpovedný riešiteľ | od | do |
|---|---|---|---|---|---|---|
| ÚAMRaVT | KPAaM | 730994 TERRINet |
Tactile floor mat in the Human - Robot Cooperation | doc. Ing. Marek Vagaš, PhD. | 06/2021 | 06/2021 |
| KVTaR | 2019-1-SK01-KA202-060772 | Technológie Industry 4. pre učiteľov a trénerov odborného vzdelávania | prof. Ing. Mikuláš Hajduk, PhD. | 10/2019 | 12/2021 | |
| 2018-1-PL01-KA202-050812 | Multifunctional Innovative Learning Assisting Network for VET in Advanced Manufacturing MILAN | prof. Ing. Mikuláš Hajduk, PhD. | 11/2018 | 4/2021 | ||
| ÚTaMI | KTMaPPV | DAAD - PPP | Entwicklung und Erprobung eines kombinierten Werkzeugs zur Präzisionsbearbeitung hochbean-spruchter Innen- und Außenflächen am Beispiel von Gelenkpfannen | prof. Ing. Ildikó Maňková, CSc.. | 2/2021 | 12/2022 |
| 734205-NEWEX- H2020-MSCA -RISE-2016 |
Investigation and development of a new generation of machines for the processing of composite and nanocomosite materials | prof. Ing. František Greškovič, CSc. | 1/2017 | 12/2021 | ||
| ÚŠIP | KBIaM | EFOP-5.2.2-17-2017-00014 | Transnational cooperation project on additive manufacturing | prof. Ing. Radovan Hudák, PhD. | 11/2019 | 10/2021 |
| 2/103404/2021 PČ |
Vývojový výskum a analýza dentálneho kompozitného materiálu (partner: FORUM Engineering Technologis 96, Ltd., Izrael) | prof. Ing. Radovan Hudák, PhD. | 2/2021 | 5/2021 | ||
| Fakultné pracovisko |
PaIC | 824990-RIMA | Robotics for Infrastructure Inspection and Maintenance | Ing. Ladislav Vargovčík, PhD. | 1/2019 | 12/2022 |
Records and outputs of publishing activities at:
https://portal.lib.tuke.sk/#/login
Method of calculating author's sheets
in accordance with Annex no. 10 to Decree no. 397/2020 Coll. on the central register of records of publishing activities and the central register of records of artistic activities:
Author's sheet (AH) - 36,000 printed characters (20 standard pages, 1 page contains 1,800 characters), 620 verses for poems, 2,300 cm2 for maps and graphic reproductions (1 AH is approximately 48 cm × 48 cm, 3 AH 6,900 cm2 - size approx. 83 cm × 83 cm), for audiovisual recordings published on the Internet or on physical media for at least 60 minutes.
Conversion of standard pages and author sheets:
1 standard page = 30 lines x 60 characters (including spaces) = 1800 characters
1 AH = 20 standard pages x 1800 = 36,000 characters
1 AH images as an area of 2300 cm2
Colors of the Faculty of Mechanical Engineering TUKE and its workplaces
Envelope template for textbooks to download
Sample envelopes for documents for habilitation and inauguration proceedings according to the design manual valid at the FME.
In Corell Draw editing format:
In pdf format
|
Project registration number | Name of the project | Responsible solver | Institute / Department | Solution time | |
|---|---|---|---|---|---|
| from | to | ||||
| IVG-24-01 | EspressoBot: Innovative coffee preparation system with FANUC CRX 10iA collaborative robot | prof. Ing.Jozef Svetlík, PhD. | ÚAMRaVT / KVTaR | 4/2024 | 12/2024 |
| IVG-24-02 | Production of an innovative three-shaft 7-speed sports sequential transmission with tandem electronic shifting | Ing. Miroslav Palko, PhD. | ÚTaMI / KAV | 4/2024 | 12/2024 |
| IVG-24-03 | Development and production of an experimental car from composite materials for the Shell Eco Marathon 2024 race | Ing. Štefan Kender, PhD. | ÚTAMI / KAV | 4/2024 | 12/2024 |
| Institute | Department | Project registration number | Project name | Responsible researcher | from | to |
|---|---|---|---|---|---|---|
| ÚAMRaVT | KPAaM | 1/0436/22 | Research and development of modeling methods and control algorithms for kinematically redundant mechanisms | prof. Ing. Ivan Virgala, PhD. | 2022 | 2025 |
| 1/0169/22 | New methodologies for accessing data from automated and robotized workplaces | doc. Ing. Marek Vagaš, PhD. | 2022 | 2025 | ||
| 1/0409/25 | Unconventional and soft robotic structures | prof. Ing. Michal Kelemen, PhD. | 2025 | 2028 | ||
| KVTaR | 1/0215/23 | Research and development of robotized workplaces equipped with industrial and collaborative robots | doc. Ing. Ján Semjon, PhD. | 2023 | 2026 | |
| 1/0294/24 | Research and development of a multi-robot system with distributed intelligence in the cloud | prof. Ing. Marek Sukop, PhD. | 2024 | 2027 | ||
| ÚTaMI | KTMaPPV | 1/0330/24 | Research into the bondability of lightweight sandwich and composite materials | doc. Ing. Ľuboš Kaščák, PhD. | 2024 | 2026 |
| 1/0229/23 | Research into the applicability of thermal drilling technology for creating multi-material joints in automotive | doc. Ing. Anna Guzanová, PhD. | 2023 | 2026 | ||
| 1/0539/23 | Research into hybrid sandwich structures with customized properties | prof. Ing. Ján Slota, PhD. | 2023 | 2026 | ||
| KAV | 1/0238/23 | Implementation of CAx systems and virtual engineering techniques in the redesign of car body crumple zone parts | prof. Ing. Emil Evin, PhD. | 2023 | 2026 | |
| 1/609/25 | Research and development of methodologies for evaluating sheet metal deformations and manufacturability of automotive components in a virtual environment | doc. Ing. Miroslav Tomáš, PhD. | 2025 | 2028 | ||
| 1/0597/23 | Possibilities of applying laser additive technologies in the restoration of functional surfaces | prof. Ing. Janette Brezinová, PhD. | 2023 | 2026 | ||
| ÚPIMaAM | KPaDI | 1/0508/22 | Innovative and digital technologies in production and logistics processes and systems | doc. Ing. Miriam Pekarčíková, PhD. | 2022 | 2025 |
| 1/0383/25 | Optimization of manufacturing operations and their digitalization using advanced virtual resources and tools | prof. Ing. Peter Trebuňa, PhD. | 2025 | 2028 | ||
| KRaEP | 1/0219/23 | Empirical research on the connection between the implementation of advanced technologies and sustainable behavior of manufacturing enterprises in Slovakia | doc. Ing. Juraj Šebo, PhD. | 2023 | 2026 | |
| KAMaI | 1/0243/23 | Valuation functions inducing graph colorings | prof. RNDr. Martin Bača, CSc. | 2023 | 2026 | |
| ÚMEaKI | KAMaSI | 1/0516/22 | Research into the impact of composite material production technology on their mechanical and fatigue properties using numerical and experimental methods | prof. Ing. Miroslav Pástor, PhD. | 2022 | 2025 |
| 1/0152/24 | Development of methodologies for non-destructive mechanics methods for evaluating the mechanical properties of elements produced by additive manufacturing | prof. Ing. Peter Frankovský, PhD. | 2024 | 2027 | ||
| 1/0342/24 | Using modern mechanics and optimization techniques to increase the efficiency of structural load-bearing elements | prof. Ing. Jozef Bocko, CSc. | 2024 | 2027 | ||
| KKaDI | 1/0573/25 | Research, development and testing of torsional vibration tuners | prof. Ing. Robert Grega, PhD. | 2025 | 2028 | |
| 1/0495/25 | Research and implementation of low-emission technologies for sustainable propulsion systems in transport | doc. Ing. Michal Puškár, PhD. | 2025 | 2028 | ||
| KEI | 1/0224/23 | Research and implementation of a low-pressure hydrogen storage system for powering industrial and agricultural vehicles | doc. Ing. Marián Lázár, PhD. | 2023 | 2025 | |
| 1/0587/25 | Research into the use of metal hydride materials in vehicle cooling in the hydrogen pressure reduction process | prof. Ing. Tomáš Brestovič, PhD. | 2025 | 2027 | ||
| ÚŠIP | KBIaM | 1/0403/25 | Analysis of biomaterials in bioprinting spheroids from mesenchymal stem cells used in tissue bioengineering | doc. RNDr. Marianna Trebuňová, PhD. | 2025 | 2028 |
| 1/0387/22 | Development, optimization and application of coordinate measurement strategies for geometric parameters and structure of 3D printed parts | prof. Ing. Radovan Hudák, PhD. | 2022 | 2025 | ||
| 1/0191/24 | Development, optimization and application of coordinate measurement strategies for geometric parameters and structure of 3D printed parts | prof. Ing. Miroslav Dovica, PhD. | 2024 | 2026 |
| Ústav | Katedra | R.č. projektu | Názov projektu | Zodpovedný riešiteľ | od | do |
|---|---|---|---|---|---|---|
| ÚAMRaVT | KPAaM | 1/0436/22 | Výskum a vývoj metód modelovania a algoritmov riadenia kinematicky redundantných mechanizmov | prof. Ing. Ivan Virgala, PhD. | 2022 | 2025 |
| 1/0169/22 | Nové metodiky prístupov k dátam automatizovaných a robotizovaných pracovísk | doc. Ing. Marek Vagaš, PhD. | 2022 | 2025 | ||
| 1/0201/21 | Mobilný mechatronický asistent | prof. Ing. Michal Kelemen, PhD. | 2021 | 2024 | ||
| KVTaR | 1/0215/23 | Výskum a vývoj robotizovaných pracovísk vybavených priemyselnými a kolaboratívnymi robotmi | doc. Ing. Ján Semjon, PhD. | 2023 | 2026 | |
| 1/0294/24 | Výskum a vývoj multirobotického systému s distribuovanou inteligenciou v cloude | prof. Ing. Marek Sukop, PhD. | 2024 | 2027 | ||
| ÚTaMI | KTMaPPV | 1/0330/24 | Výskum spájateľnosti ľahkých sendvičových a kompozitných materiálov | doc. Ing. Ľuboš Kaščák, PhD. | 2024 | 2026 |
| 1/0229/23 | Výskum využiteľnosti technológie termálneho vŕtania na tvorbu multimateriálových spojov v automotive | doc. Ing. Anna Guzanová, PhD. | 2023 | 2026 | ||
| 1/0539/23 | Výskum hybridných sendvičových štruktúr s kustomizovanými vlastnosťami | prof. Ing. Ján Slota, PhD. | 2023 | 2026 | ||
| KAV | 1/0238/23 | Implementácia CAx systémov a techník virtuálneho inžinierstva pri redizajne dielov deformačných zón karosérie automobilov | prof. Ing. Emil Evin, PhD. | 2023 | 2026 | |
| 1/0597/23 | Možnosti aplikácie laserových aditívnych technológií pri obnove funkčných povrchov | prof. Ing. Janette Brezinová, PhD. | 2023 | 2026 | ||
| ÚPIMIPaAM | KPaDI | 1/0508/22 | Inovatívne a digitálne technológie vo výrobných a logistických procesoch a systémoch | doc. Ing. Miriam Pekarčíková, PhD. | 2022 | 2025 |
| KRPaIP | 1/0485/22 | Vývoj metodík zvyšovania akustickej kvality zvuku produktov vizualizačnými a psychoakustickými metódami | Dr. h. c. mult. prof. Ing. Miroslav Badida, PhD. | 2022 | 2024 | |
| 1/0219/23 | Empirický výskum prepojenia implementácie pokrokových technológií a trvalo udržateľného správania výrobných podnikov na Slovensku | doc. Ing. Juraj Šebo, PhD. | 2023 | 2026 | ||
| 1/0340/21 | Vplyv pandémie a následnej hospodárskej krízy na vývoj digitalizácie podnikov a spoločnosti na Slovensku | prof. Ing. Jaroslava Kádárová, PhD. | 2021 | 2024 | ||
| KAMaI | 1/0243/23 | Ohodnocovacie funkcie indukujúce grafové ofarbenia | prof. RNDr. Martin Bača, CSc. | 2023 | 2026 | |
| ÚMEaKI | KAMaSI | 1/0516/22 | Výskum vplyvu technológie výroby kompozitných materiálov na ich mechanické a únavové vlastnosti využitím numerických a experimentálnych metód | prof. Ing. Miroslav Pástor, PhD. | 2022 | 2025 |
| 1/0152/24 | Vývoj metodík nedeštruktívnych metód mechaniky pre hodnotenie mechanických vlastností prvkov vyrobených aditívnou výrobou | prof. Ing. Peter Frankovský, PhD. | 2024 | 2027 | ||
| 1/0342/24 | Využitie moderných postupov mechaniky a optimalizácie na zvyšovanie efektivity nosných prvkov konštrukcií | prof. Ing. Jozef Bocko, CSc. | 2024 | 2027 | ||
| KKaDI | 1/0318/21 | Výskum a vývoj inovácii pre efektívnejšie využitie obnoviteľných zdrojov energie a znižovanie uhlíkovej stopy vozidiel | doc. Ing. Michal Puškár, PhD. | 2021 | 2024 | |
| KEI | 1/0224/23 | Výskum a implementácia nízkotlakového vodíkového uskladňovacieho systému do pohonu priemyselných a poľnohospodárskych dopravných prostriedkov | doc. Ing. Marián Lázár, PhD. | 2023 | 2025 | |
| 1/0532/22 | Výskum a vývoj energetických a konštrukčných prvkov vodíkového zásobníka pre mobilné aplikácie | prof. Ing. Tomáš Brestovič, PhD. | 2022 | 2024 | ||
| ÚŠIP | KBIaM | 1/0599/22 | Konštrukčné riešenie a biomechanická analýza personalizovaných inštrumentov pre arthroskopické aplikácie | Dr. h. c. mult. prof. Ing. Jozef Živčák, PhD., MPH | 2022 | 2024 |
| 1/0387/22 | Vývoj a testovanie systémov pre riadenú stimuláciu rastu buniek v prostredí bioreaktora s využitím počítačového videnia | prof. Ing. Radovan Hudák, PhD. | 2022 | 2025 | ||
| 1/0191/24 | Vývoj, optimalizácia a aplikácia stratégií súradnicových meraní geometrických parametrov a štruktúry súčiastok vyrobených 3D tlačou | prof. Ing. Miroslav Dovica, PhD. | 2024 | 2026 | ||
| Fakultné pracovisko |
PaIC | 1/0457/21 | Zefektívnenie obrábania niklových superzliatin textúrovaním rezných nástrojov a použitím tuhých procesných médií | doc. Ing. Marek Vrabeľ, PhD. | 2021 | 2024 |
| Institute | Department | Project number | Name of the project | Responsible solver | From | To |
|---|---|---|---|---|---|---|
| ÚAMRaVT | KPAaM | 1/0436/22 | Research and development of modelling methods and control algorithms for kinematically redundant mechanisms | doc. Ing. Ivan Virgala, PhD. | 2022 | 2025 |
| 1/0169/22 | New data access methodologies for automated and robotic workplaces | doc. Ing. Marek Vagaš, PhD. | 2022 | 2025 | ||
| 1/0201/21 | Mobile mechatronic assistant | prof. Ing. Michal Kelemen, PhD. | 2021 | 2024 | ||
| KVTaR | 1/0215/23 | Research and development of robotic workplaces equipped with industrial and collaborative robots | doc. Ing. Ján Semjon, PhD. | 2023 | 2026 | |
| ÚTaMI | KTMaPPV | 1/0597/23 | Possibilities of application of laser additive technologies in restoration of functional surfaces | prof. Ing. Janette Brezinová, PhD. | 2023 | 2026 |
| 1/0229/23 | Research on the applicability of thermal drilling technology for the creation of multi-material joints in the automotive industry | doc. Ing. Anna Guzanová, PhD. | 2023 | 2026 | ||
| 1/0539/23 | Research on hybrid sandwich structures with kustomized properties | prof. Ing. Ján Slota, PhD. | 2023 | 2026 | ||
| 1/0384/20 | Optimization of shearing conditions of electric motors in order to reduce losses of electric motors (drives) | prof. Ing. Emil Spišák, CSc. | 2020 | 2023 | ||
| KAV | 1/0238/23 | Implementation of CAx systems and virtual engineering techniques in the redesign of automotive body deformation zone parts | prof. Ing. Emil Evin, PhD. | 2023 | 2026 | |
| ÚPIMIPaAM | KPaDI | 1/0219/23 | Empirical research on the link between the implementation of advanced technologies and sustainable behaviour of manufacturing enterprises in Slovakia | doc. Ing. Juraj Šebo, PhD. | 2023 | 2026 |
| 1/0508/22 | Innovative and digital technologies in production and logistics processes and systems | doc. Ing. Miriam Pekarčíková, PhD. | 2022 | 2025 | ||
| 1/0438/20 | Interaction of digital technologies to support software and hardware communication of an advanced manufacturing system platform | prof. Ing. Peter Trebuňa, PhD. | 2020 | 2023 | ||
| KRPaIP | 1/0485/22 | Development of methodologies for improving the acoustic sound quality of products by visualisation and psychoacoustic methods | Dr. h. c. mult. prof. Ing. Miroslav Badida, PhD. | 2022 | 2024 | |
| 1/0340/21 | The impact of the pandemic and the subsequent economic crisis on the development of digitalisation of enterprises and society in Slovakia | prof. Ing. Jaroslava Kádárová, PhD. | 2021 | 2024 | ||
| KAMaI | 1/0243/23 | Evaluating functions inducing graph colorings | prof. RNDr. Martin Bača, CSc. | 2023 | 2026 | |
| ÚMEaKI | KAMaSI | 1/0516/22 | Investigation of the influence of composite materials production technology on their mechanical and fatigue properties using numerical and experimental methods | doc. Ing. Miroslav Pástor, PhD. | 2022 | 2025 |
| 1/0500/20 | Research on mechanical properties of materials with complex internal structure by numerical and experimental methods of mechanics |
prof. Ing. Jozef Bocko, CSc. | 2020 | 2023 | ||
| KKaDI | 1/0318/21 | Research and development of innovations for more efficient use of renewable energy sources and reducing the carbon footprint of vehicles | doc. Ing. Michal Puškár, PhD. | 2021 | 2024 | |
| 1/0528/20 | Solution of new tuning elements of mechanical systems | prof. Ing. Robert Grega, PhD. | 2020 | 2023 | ||
| KEI | 1/0224/23 | Research and implementation of a low-pressure hydrogen storage system for the propulsion of industrial and agricultural vehicles | doc. Ing. Marián Lázár, PhD. | 2023 | 2025 | |
| 1/0532/22 | Research and development of energy and design elements of hydrogen storage for mobile applications | prof. Ing. Tomáš Brestovič, PhD. | 2022 | 2024 | ||
| ÚŠIP | KBIaM | 1/0599/22 | Design and biomechanical analysis of personalized instruments for arthroscopic applications | Dr. h. c. mult. prof. Ing. Jozef Živčák, PhD., MPH | 2022 | 2024 |
| 1/0387/22 | Development and testing of systems for controlled stimulation of cell growth in a bioreactor environment using computer vision | prof. Ing. Radovan Hudák, PhD. | 2022 | 2025 | ||
| 1/0168/21 | Research and application of touch and non-touch methods for measuring properties of additive manufacturing products | prof. Ing. Miroslav Dovica, PhD. | 2021 | 2023 | ||
| Fakultné pracovisko |
PaIC | 1/0457/21 | Streamlining the machining of nickel superalloys by texturing cutting tools and using rigid process media | doc. Ing. Marek Vrabeľ, PhD. | 2021 | 2024 |
| Institute | Department | Project number | Name of the project | Responsible solver | From | To |
|---|---|---|---|---|---|---|
| ÚAMaRaVT | KPAaM | 1/0436/22 | Research and development of modeling methods and control algorithms for kinematic redundant mechanisms | doc. Ing. Ivan Virgala, PhD. | 2022 | 2025 |
| 1/0169/22 | New methodologies of access to data of automated and robotic workplaces | doc. Ing. Marek Vagaš, PhD. | 2022 | 2025 | ||
| 1/0201/21 | Mobile mechatronic assistant | prof. Ing. Michal Kelemen, PhD. | 2021 | 2024 | ||
| ÚTaMI | KTMaPPV | 1/0384/20 | Optimization of cutting conditions for electrical sheets in order to reduce losses of electric motors (drives) | prof. Ing. Emil Spišák, CSc. | 2020 | 2023 |
| 1/0497/20 | Application of progressive technologies in the restoration of functional areas of products | prof. Ing. Janette Brezinová, PhD. | 2020 | 2022 | ||
| 1/0154/19 | Research of combined technologies of joining various materials for the automotive industry | doc. Ing. Anna Guzanová, PhD. | 2019 | 2022 | ||
| 1/0259/19 | Research into innovative forming and & nbsp; joining methods to improve the performance of thin-walled components | prof. Ing. Ján Slota, PhD. | 2019 | 2022 | ||
| KAV | 2/0080/19 | Prediction of weldability and compressibility of combined laser welded blanks from high-strength steels with the support of CAE systems | prof. Ing. Emil Evin, PhD. (partner v projekte ÚMV SAV Košice) |
2019 | 2022 | |
| ÚPIMaIP | KPaDI | 1/0508/22 | Innovative and digital technologies in production and logistics processes and systems | doc. Ing. Miriam Pekarčíková, PhD. | 2022 | 2025 |
| 1/0340/21 | The impact of the pandemic and the subsequent economic crisis on the development of digitalisation of companies and society in Slovakia | prof. Ing. Jaroslava Kádárová, PhD. | 2021 | 2024 | ||
| 1/0438/20 | Interaction of digital technologies to support software and hardware communication of the advanced production system platform | prof. Ing. Peter Trebuňa, PhD. | 2020 | 2023 | ||
| KIP | 1/0485/22 | Development of methods for increasing the acoustic quality of product sound by visualization and psychoacoustic methods | Dr. h. c. mult. prof. Ing. Miroslav Badida, PhD. | 2022 | 2024 | |
| ÚMEaKI | KAMaSI | 1/0516/22 | Research of the influence of the technology of production of composite materials on their mechanical and fatigue properties using numerical and experimental methods | doc. Ing. Miroslav Pástor, PhD. | 2022 | 2025 |
| 1/0500/20 | Research of mechanical properties of materials with complex internal structure by numerical and experimental methods of mechanics | prof. Ing. Jozef Bocko, CSc. | 2020 | 2023 | ||
| KKaDI | 1/0318/21 | Research and development of innovations for more efficient use of renewable energy sources and reducing the carbon footprint of vehicles | doc. Ing. Michal Puškár, PhD. | 2021 | 2024 | |
| 1/0528/20 | Solution of new elements of mechanical systems tuning | prof. Ing. Robert Grega, PhD. | 2020 | 2023 | ||
| KET | 1/0532/22 | Research and development of energy and structural elements of a hydrogen storage tank for mobile applications | prof. Ing. Tomáš Brestovič, PhD. | 2022 | 2024 | |
| 1/0626/20 | Research into the possibilities of reducing the energy intensity of the process of cooling metal hydride tanks in the absorption storage of hydrogen | doc. Ing. Marián Lázár, PhD. | 2020 | 2022 | ||
| ÚŠIP | KBIaM | 1/0599/22 | Design solution and biomechanical analysis of personalized instruments for arthroscopic applications | Dr. h. c. mult. prof. Ing. Jozef Živčák, PhD., MPH | 2022 | 2024 |
| 1/0387/22 | Development and testing of systems for controlled stimulation of cell growth in a bioreactor environment using computer vision | prof. Ing. Radovan Hudák, PhD. | 2022 | 2025 | ||
| 1/0168/21 | Research and application of tactile and non-tactile methods for measuring the properties of additive products | prof. Ing. Miroslav Dovica, PhD. | 2021 | 2023 | ||
| Faculty workplace | PaIC | 1/0457/21 | Streamlining the machining of nickel superalloys by texturing cutting tools and using rigid process media | doc. Ing. Marek Vrabeľ, PhD. | 2021 | 2024 |
Study department
Office hours:
Monday
Tuesday
Wednesday
Thursday
Friday8:30 - 11:30
8:30 - 11:30
8:30 - 11:30, 13:00 - 15:00
non-paged day
8:30 - 11:30
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Phone: +421 55 602 2623
Contact
Faculty of Mechanical Engineering
Technical University of Košice
Letná 9/B
042 00 Košice
phone: +421 55 602 2016
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.